VHF radio users, please note that the CalAmp INTEGRA-TR Model # is currently obsolete. This model had a VHF channel bandwidth of 6.25 MHz. It has been replaced with model # which has a VHF channel bandwidth of both 6.25 and 12.5 MHz. Besides the change of the radio module the old and new models are the same. To program the new model software V7.01 is required.

The Dataradio Integra-TR from CalAmp provides advanced features without complicated system setup. With up to 5W output in UHF & VHF, the Integra-TR offers reliable data communications over an extended range.

This new version of the software can be downloaded from the CalAmp site. The route to find this download is: > under the “MORE” tag towards the top right of the page, click on “SUPPORT” > under the paragraph “Product Support Material” click on the hyper link “Help Portal” > on the left side of the page under “Support” click “Field Programming Software” > select “Integra-TR 2011” This version of the software is backward compatible with the old models. With one caveat. The new model needs to have a new data file created. In other words, the programming of the new model needs to start from scratch.

This new data file is not compatible with the old model. So – while the new software is backward compatible with the old model there needs to be two separate data files, one for the old model and one for the new model.

The new model comes with a power cable in the box, but if an additional cable is required the SKU is the same, i.e. The connector cable, however, has a new part # – 897-5000-101. The cable description is SMA(M) to RA N(M) 18” RG400 and is now ROHS compliant (the RA stands for right angle).

• USAT Contact USATCORP.COM for more information or quantity pricing USATCORP.COM 1-888-550-8728 INTEGRA-TR™ WIRELESS MODEM FOR LICENSED SPECTRUM USER MANUAL PN 001-4008-100 REV 6 FEBRUARY 2013. • INTEGRA-TR™ WIRELESS MODEM FOR LICENSED SPECTRUM USER MANUAL PN 001-4008-100 REV 6 FEBRUARY 2013.

• REVISION HISTORY Rev 0 June 2011 Initial Release. Rev 1 August 2011 Changed Dual Band references to Dual IF, sections 1.6 and 1.8. Deleted Synthesizer reference, section 4.3.1.3. Rev 2 January 2012 Added VHF Dual Band specifications and part numbers, splinter channel frequencies and FCC/IC indicators. Rev 3 April 2012 Corrected part numbers in section 1.6.

• (i.e., have errors), or be totally lost. Significant delays or losses of data are rare when wireless devices such as the Integra-TR are used in a normal manner with a well-constructed network. Integra-TR should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. • Point-to-Point System..17 3.2.2 Point-to-Multipoint System..18 3.2.3 Extending a Landline (Tail Circuit)..20 Integra-TR Field Programming Software.. 21 Integra-TR Programmer Window..21 File Menu...

21 Edit Menu... 22 4.3.1 Setup Modem/Radio Parameters..23 4.3.2.

• 4.4.11 Ping Test..55 4.4.12 ASCII/Hex Terminal..57 Program Code Menu..59 Network Optimization.. 60 Choose the best protocol..60 Check timer settings..60 Avoid flow control..60 Use the highest suitable port baud rate..60 Evaluate the need for online diagnostics.. • Integra-TR is a high-speed transparent integrated wireless modem. It is FCC refarming compliant and designed specifically to fit the needs of SCADA, telemetry and control applications. Integra-TR provides the communication links to data equipment for installations where wired communication is impractical.

• PHYSICAL DESCRIPTION Integra-TR consists of a logic PCB (which includes modem circuitry) and a radio module. Each logic PCB and radio module are matched together and characterized in the factory to optimize performance as an intelligent unit. The two boards then slide into the rails of an extruded aluminum case. • DTE baud rates from 1200 to 19200 are supported. Integra-TR's are factory set for or 9600 b/s, 8 bits, no parity, and 1 stop bit.

Unless required by your operating protocol, we advise restricting port speed to be equal to or less than the RF network speed. • For DTE that lack RTS control, Integra-TR can operate in DOX (Data Operated Transmit) mode with only Transmit Data, Receive Data and Ground. This 3-wire interface is shown in Figure XX. Figure 3 - 3-wire Interface 1.4.4 SETUP PORT The Setup port uses a DE-9 female connector configured as DCE. Signals are described in Table 3. • 1.5.1 HEAT SINK The rear panel heat sink is essential for proper operation of the Integra-TR transmitter.

Punjab university ma bank challan form university. We can easily teach you the scholarships and grants that any of us have got inside our data source linked your own search punjab university degree verification challan form. From time to time, an individual search for a distinct fund and also you can't know we now have other people that meets better to your preferences. One example is, you will find grants which deal with this part as well as the journey towards area that this college or university tend to be, as well as the tuition expenses. In the following data, you'll get information in the fund about punjab university degree verification challan form plus the service provider and that means you could speak to these individuals and also attempt to get the economic be an aid to research with them. In this internet site you will find all the data and means to check in the great college or university with a scholarship grant.